- Startseite
- Alle Kategorien anzeigen
- Modelle und Clones
- A1000 Turbokarten
- A1200 Turbokarten
- A2000 Turbokarten
- A3000 Turbokarten
- A4000 Turbokarten
- A500 Turbokarten
- A600 Turbokarten
- Bridgeboards & Emulatorkarten
- CD32 Turbokarten
- CDTV Turbokarten
- Custom Chips
- Digitiser & Framegrabber
- Flickerfixer & Scandoubler
- Floppy Controller
- Genlocks
- Grafik (non RTG) & Videokarten
- Grafikkarten (RTG)
- I/O Karten
- IDE Controller
- ISDN & Modem
- Tastaturen & Adapter
- Kickstart Umschalter
- MIDI Geraete
- versch. ZORRO Karten
- verschiedene Hardware
- Monitore
- Netzwerk Karten
- Prozessoren
- RAM Erweiterungen
- Scanner
- SCSI Controller
- Sound Karten
- Soundsampler
- Bandlaufwerke & Backup
- Time Base Correctors
- Tower Kits
- Zorro Erweiterungen & Busboards
- Mystery Corner
- Suche über Anschluss
- Sitemap
IDE Controller
BSC: Tandem
Connection: Zorro II |
Hi Res Version, Image 2 - 230K
Hi Res Version, Image 3 - 162K
A half length Zorro II card which provides a 3.5" IDE controller and a Mitsumi Controller. This card supports any IDE device and ATAPI device connected to its IDE controller. It uses (oktagon.device) for IDE devices and (tandemat.device) for ATAPI devices. The Mitsumi controller is actually a custom controller based on IDE made by Mitsumi. These controllers are normally found on PC sound cards and allowed a way of adding a CDROM without wasting any IDE ports. Only CDROMs of the Mitsumi type can be used on the Mitsumi controller. They use tandemcd.device. Please note that Mitsumi also make IDE CDROMs, so the CDROM you use must support the Mitsumi controller standard, not just be branded by Mitsumi.
Contributions to this page by:
Arthur Yau, Robert Williams
Letzte Änderung des Artikels: 2009-01-25 21:37
Revision: 1.0
Kommentieren nicht möglich