- Startseite
- Alle Kategorien anzeigen
- Modelle und Clones
- A1000 Turbokarten
- A1200 Turbokarten
- A2000 Turbokarten
- A3000 Turbokarten
- A4000 Turbokarten
- A500 Turbokarten
- A600 Turbokarten
- Bridgeboards & Emulatorkarten
- CD32 Turbokarten
- CDTV Turbokarten
- Custom Chips
- Digitiser & Framegrabber
- Flickerfixer & Scandoubler
- Floppy Controller
- Genlocks
- Grafik (non RTG) & Videokarten
- Grafikkarten (RTG)
- I/O Karten
- IDE Controller
- ISDN & Modem
- Tastaturen & Adapter
- Kickstart Umschalter
- MIDI Geraete
- versch. ZORRO Karten
- verschiedene Hardware
- Monitore
- Netzwerk Karten
- Prozessoren
- RAM Erweiterungen
- Scanner
- SCSI Controller
- Sound Karten
- Soundsampler
- Bandlaufwerke & Backup
- Time Base Correctors
- Tower Kits
- Zorro Erweiterungen & Busboards
- Mystery Corner
- Suche über Anschluss
- Sitemap
A500 Turbokarten
Harms Computertechnik: Professional 030
Connection: CPU Socket |
Magazine article about this card - 176K
Processor: | 030@16Mhz or 030@33Mhz |
FPU: | Optional 68881 or 68882 (PGA) at the same frequency as the processor. |
MMU: | Internal |
Max Ram: | 4MB (Requires an additional RAM daughterboard) |
Ram Type: | Unknown (Requires an additional RAM daughterboard) |
An accelerator for the A500 and A2000 which plugs into the CPU socket.
The accelerator can be switched back to 68000 mode in software or
hardware for compatibility reasons with old software.
JP1 - ON = 68000 fallback mode (disables the RAM as well)
JP2-4 - memory configuration (see below)
JP5 - ON = disable data and instruction caches
JP6 - ON = disable MMU
SP1 - if the board fails to work in your Amiga, set this jumper (Segmented??)
JP2-4 configs:
000 - 1MB, slots 1-8, address 090000-09ffff
010 - 2MB, 1-16, 080000-09ffff
100 - 4MB, 1-8, 060000-09ffff
110 - 8MB, 1-16, 020000-09ffff
001 - 1MB, 1-8, 4070000-09ffff
011 - 2MB, 1-16, 4060000-407ffff
101 - 4MB, 1-8, 4040000-407ffff
111 - 8MB, 1-16, 4000000-407ffff
Contributions to this page by:
Alex Lupták, Frank Cieslewicz, Steve Geary
Letzte Änderung des Artikels: 2009-01-25 13:44
Revision: 1.0
Kommentieren nicht möglich